Explainer · BW VoIP

SIP calling, explained: how a phone number becomes an internet call

2026-11-207 min readBy Black & White StudioLast reviewed 2026-11-20
In short

SIP finds the other person and agrees how to talk; it does not carry your voice. That split explains most VoIP faults. Wideband codecs carry more of the speech spectrum than a mobile call, and call quality depends on latency, jitter and packet loss rather than raw speed.

If you have ever been handed a sheet of paper with a username, a password and something like sip.provider.com written on it, and been told "just put this in a dialer app" — this is the explanation that should have come with it.

The one-sentence version

SIP is the protocol that handles finding the other person and agreeing how to talk. It does not carry your voice. Once the two ends have agreed, the actual audio travels separately. SIP is the receptionist; the audio stream is the conversation.

That split explains almost every strange VoIP problem you will ever hit. When the call connects but you hear nothing, SIP worked and the audio path did not. Those are two different systems failing independently, which is why "it rings but there's no sound" is such a common and confusing symptom.

What actually happens when you press call

  1. Register. On startup your app tells the SIP server "this account is reachable at this address right now". The server remembers. This is why incoming calls can find you at all, and why a dropped registration means the phone silently stops ringing.
  2. Invite. You dial. Your app sends an INVITE to the server, which passes it toward the destination.
  3. Negotiate. Both ends exchange a list of codecs — the schemes used to compress and decompress audio — and pick one they both support. This is where audio quality is actually decided.
  4. Ring, then answer. The far end rings; when it picks up, both sides have each other's media address.
  5. Talk. Audio now flows directly between the two phones as RTP (Real-time Transport Protocol, the stream that actually carries the sound), often bypassing the SIP server entirely.
  6. Hang up. A BYE message closes the session.

Steps one and three are the ones worth understanding, because they are where the two most common failures live.

Why HD voice actually sounds different

A traditional phone call carries roughly 300 Hz to 3.4 kHz. This is not a rule of thumb — it is the passband specified for narrowband telephony in the ITU-T G.711 recommendation, chosen in the era of copper lines as just enough for intelligible speech. It is also why you have spent your life saying "S for Sierra" on the phone.

The reason is physical. The sounds that distinguish s from f, or t from p, live largely above 4 kHz. Narrowband calls cut exactly that band, so your brain has to reconstruct consonants from context. That reconstruction is effortful, and it is a large part of why long phone calls are tiring.

Wideband codecs — G.722 and Opus — carry roughly 50 Hz to 7 kHz or wider, as set out in their own specifications. The consonants survive. People describe this as sounding "like they're in the room"; the measurable difference is simply that more of the speech spectrum arrives.

CodecAudio bandTypical bandwidthNotes
G.711300 Hz – 3.4 kHz~87 kbpsNarrowband, universal, uncompressed
G.729300 Hz – 3.4 kHz~31 kbpsNarrowband, low bandwidth
G.72250 Hz – 7 kHz~87 kbpsWideband, widely supported
Opus50 Hz – 20 kHz~12–64 kbpsWideband, adapts to network conditions

Opus is usually the right default. It handles packet loss and shifting bandwidth better than the fixed-rate codecs, which matters enormously on mobile data where conditions change as you move.

The network conditions that decide call quality

Voice is unusual among internet traffic: it needs very little bandwidth but is extremely sensitive to timing. A video download does not care if packets arrive in bursts. A phone call does.

Three numbers matter, and raw speed is not among them:

This is why a 100 Mbps connection can carry a terrible call while a 5 Mbps one carries a perfect call. A busy Wi-Fi network with one device uploading a large file can wreck voice quality without the speed test showing anything wrong. If calls degrade at predictable times of day, look at congestion rather than bandwidth.

The two failures you will actually hit

One-way audio

You hear them; they do not hear you. Almost always a NAT problem. NAT (Network Address Translation) is what your router does when it lets many devices share one public internet address — useful, but it means your phone does not know the address the outside world sees it at, so SIP can negotiate a media address the other side cannot reach. Providers work around this with a STUN server (Session Traversal Utilities for NAT), which simply tells your phone what its public address is, or by relaying the audio. If your app has a STUN setting and one-way audio is happening, that is the first thing to check.

The phone stops ringing after a while

Registration expired and was not renewed — usually because the operating system put the app to sleep to save battery. Outgoing calls still work, which makes this maddening to diagnose: the account looks fine until someone mentions they could not reach you. On Android, exempting the dialer from battery optimisation is the standard fix.

What a SIP dialer is good for

Being specific about this matters, because VoIP is often oversold:

What it is not good for: emergency calls, which may not route correctly or carry your location; and calling when you have no internet at all, which is exactly when a normal mobile line still wins. A SIP dialer is a strong addition to a mobile phone, not a replacement for one.

Who wrote this, and on what basis

We build BW VoIP, a SIP dialer for Android, and have set it up against a range of providers and PBXs. The codec bandwidths cited are from the published ITU-T recommendations, which are linked inline so you can check them.

Written by the Black & White Studio product team, Dhaka. Last reviewed 20 November 2026; rates, rules and platform behaviour change, so check anything time-sensitive against a current source. Spotted an error? Tell us — we correct things.

BW VoIP — SIP dialer with HD voice

Connect any SIP account, sync contacts, and make low-latency HD calls over Wi-Fi, 4G and 5G. Works with your existing provider or PBX.

See BW VoIP →